Exhaust Systems and Accessories
Watercooled or dry systems, standard or bespoke risers spray heads, silencers, separators, DPF & SCR aftertreatment solutions
Standard product range:
- To suit exhaust systems from 38mm to
203mm diameter - Extensive range of different shapes and sizes
Bespoke solutions:
- Designed to meet customers requirements
- Solutions to c. 4000hp
- Spray rings to DN700
- DPF & SCR solutions by Emigreen
- Lloyd’s Type Approvals
Bespoke Risers and Spray Heads
The general make-up of a riser and spray head assembly is shown below.
Each system is designed and manufactured to suit the particular engine and engine room configuration. Supports and thermal jackets are normally suppliedas part of the installation kit.
| Parts | Description |
|---|---|
| 1 | Optional down angled spray head |
| 2 | Spray head with water injection connection which is installed into the exhaust hose |
| 3 | Curved stainless steel bend, used in the upper and lower sections |
| 4 | Flange connector to suit engine turbo outlet |
| 5 | Riser tube as required |
| 6 | Flange connection |
| 7 | Heat protective jackets |
| 8 | Heat protective jacket for riser tube |
| 9 | Support brackets as required |
Composite Silencers and Separators
Lift Silencers – Top In Top Out
Drawings and dimensions are for guidance. Alternative sizes and configurations available on request. Reference numbers that end with B are not Lloyd’s approved.
Lift Silencers – Side In Top Out
Drawings and dimensions are for guidance. Alternative sizes and configurations available on request. Reference numbers that end with B are not Lloyd’s approved.
Lift Silencers – Side Angle In Top Out
Drawings and dimensions are for guidance. Alternative sizes and configurations available on request.
Lift Silencers – End In End Out
Drawings and dimensions are for guidance. Alternative sizes and configurations available on request.
In-line Round Body Silencers
Drawings and dimensions are for guidance. Alternative sizes and configurations available on request. All units are made to order and customisable.
In-line Oval Body Silencers
Dual Chamber Silencers
Combined Silencer / Separators
Drawings and dimensions are for guidance. Alternative sizes and configurations available on request. All units are made to order and customisable.
Below is the Full Range of Halyard products. This can either be viewed in the window below (select the desired width) or, alternatively, click on the link underneath the window and this will open the Guide in the browser.